|
|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
| EFI Tuning, Fuel, & Electronics Tech Technical Discussion on Tuning Turbocharged Vehicles and kits. Specifically includes EFI and Electronics discussions like FAST, DFI, Motec, AEM, and stock EFI systems. |
 |
|
|
Thread Tools | Search this Thread | Display Modes |
10-23-2004
|
#1 |
|
Orlando or BUST!
Join Date: Oct 2004
Location: Orlando, FL
Posts: 3,380
 |
Greddy Profec B Electronic Boost Controller
All i just wanted to post this. This is the pdf that i used to install my EBC. I am not all that familiar with this thing and was wondering who may have some experience with Electronic Boost Controllers. Ok so here is my delima. I have a 12lb spring in the wastegate and the EBC will not turn down any more than 12psi. I have a 6lb spring and I think with the 6lb spring i will be able to turn it down to at LEAST 6psi. What is the weakest spring I can get for a Tial 38mm Wastegate? If i am incorrect and this should actually be able to turn the boost all the way down with the 12lb spring i would like to know.
Thanks for any help, Mike Last edited by TurboMike : 10-23-2004 at 03:30 PM. |
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
