Cold side piping?

[coolbluestreak]

What do you guys use for cold side piping, about all I can find is exhaust pipe, and I don't want that much weight if I can help it?

[SuperDuty]

that is what i am using....my cold side piping is 3" exhaust......i went to midas and asked them to bend me a couple 45's and a couple 90's, and to be sure they did the bends with as little kink in the pipe as possible........i believe there are a couple vendors here too, that can get mandrel bent piping that has zero kinks......little more expensive then regular exhaust pipe..........hotwheels

[coolbluestreak]

do you remember what they charged you for the bends?

[SuperDuty]

it was under a hundred bucks........can't remember right off hand......just call around to some local exhaust shop's in your area and tell them what you need and get a price quote......that's what i did and midas was the least expensive

[coolbluestreak]

yeah, I have a guy around here that has done exhaust on all my rides, so I'll see what he sez.

[SuperDuty]

hey, i almost forgot, welcome to the site man........great to have you on board.....hotwheels

[coolbluestreak]

Thanks!:blob7:

[SuperDuty]

no problem man, just glad you found your way here..........

[turbo_gt40_5.0]

look down at the bottom of the page for the mild steel mandrel bends on ebay. They are pretty damn cheap. all them are under $17. http://search.ebay.com/mandrel-bend_W0QQsofocusZbsQQsbrftogZ1QQfromZR10QQcatrefZC 6QQftrtZ1QQftrvZ1QQfsopZ1QQfsooZ1QQcoactionZcompar eQQcopagenumZ1QQcoentrypageZsearch

[SuperDuty]

wow, those are some awesome prices man..........great find

[Disney Lincoln]

If you want low weight, you can get mandrel bn Aluminum pipe and piece it together with that.

I used Old tailpipes from a 94 GT and a 00 GT. :D